Product

Degreasing Powder

DEGREASING POWDER is a low foaming strong alkaline cleaner for spray degreasing of iron of steel strips, with proven effectiveness in degressing and removal of dirst and smuts prior to hot dip galvanizing electroplating ect.

Initial bath Make Up:-
Add 20-60 kgs of Degreasing Powder for every, 1,000 of water.

Bath Replenishment:-
To raise the points titration by one ml. Add 0.7 kgs of per 1,000 ltrs bath.

Operating Data:-

Points Titration : 30-90 mis
Temperature : 50-70º C
Spray Time : 2-10 seconds or more
Spray Pressure : 1.0-1.5 Kg/sq. cm.

Bath Contoral and Maintenance:-
Points Titrations : Pipette 10 mis. of bath sample inot a conical flask and add 50 mis. of distilled water. Add 1-2 drops of methyl orange indicator and titrate with 0.1 N hydrochloric acid to red and oints. The number of 0.1 N hydrochloric acid consumed is the Points of the bath.

Discardal:-
The bath should be discarded depending on bath maintenance, the contamination build up and the work load processed. Normally, discardal frequency would be 40-90 days.

Handling Precaution:-
Degreasing Powder is strongly alkaline. Use gloves, goggles, aprons and boots while handling chemical or its solution. Splashes on skin should be washed off with clean water. If it is splashed into the eyes wash off with plenty of clean water & obtain medical attention.

Disposal:-
Degreasing powder bath should be neutralized before disposal.